Series illustrations. Actual configuration is subject to the confirmed drawing.
1.5m IEC C7 to C8 Figure-8 Male-to-Female Power Extension Cord for PC, Black 0.75mm² Copper Lead
-
When You'll Get It:Nov 26 - Nov 30
-
Shipping & Support: In-stock items ship in 24 hours; custom orders ship per contract. Free shipping on orders over $10,000. For bulk buys, get a personal support rep and quick reimbursement if anything's defective.
-
Cable Length1.5 m(4.92ft)End TypeC7, C8
-
Rated Current2.5aTypeAc Power Cord
-
ApplicationHome Appliance, Computer
-
Female End TypeIECIP LevelIP11
-
Male End TypeIECMaterialCopper
-
Wire Type0.75MM
Extend a matching figure-eight power connection with this black IEC C7-to-C8 lead. Its 1.5 m reach, copper construction and 0.75 mm² conductor-area configuration provide a defined starting point for a compatible computer or appliance extension request.
The important choice is the pair of connection points already in use. Identify both ends of that power path before choosing an extension between them.
C7 and C8 in the same extension
The male-to-female C7/C8 arrangement gives this lead its figure-eight extension role. Check the connector geometry and any polarity or keying requirement on the actual connection, then confirm that the requested ends match. For a computer or appliance, the device inlet and existing lead are the useful reference points for that check.
A 1.5 m black copper configuration
The supplied configuration combines a 1.5 m length with black color, copper material and a 0.75 mm² conductor-area option. Check the extra reach required by the equipment and the intended route, then include those dimensions in the request. A clear length and connector brief helps distinguish this extension from a different figure-eight power lead.
Match the complete power connection
The cord has a 2.5 A current designation, and the complete voltage rating should be confirmed for the selected assembly. Match the lead to the equipment electrical requirements as well as the C7/C8 mating forms. State the required 1.5 m reach, conductor configuration and exact ends together so the extension can be selected for the actual power path it needs to join.