Series illustrations. Actual configuration is subject to the confirmed drawing.
10AWG/5.3mm² Red/Black Soft Silicone Battery and Inverter Wire, 600V −60–200°C
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Nominal sizeMultiple AWG optionsRated voltage600 V
-
Insulation materialSilicone
-
Conductor MaterialTinned Copper(custom Pure Copper or as request )Diameter30AWG, 28AWG, 26AWG, 24AWG / 0.2 mm², 22AWG / 0.3 mm², 20AWG / 0.5 mm², 18AWG / 0.75 mm², 17AWG / 1.0 mm², 16AWG/1.27 mm², 15AWG / 1.5 mm², 14AWG / 2.0 mm², 13AWG / 2.5 mm², 12AWG / 3.5 mm², 11AWG / 4 mm², 10AWG / 5.3 mm², 9AWG / 6.53 mm², 8AWG / 8.3 mm², 7AWG / 12 mm²., 6AWG / 16 mm², 5AWG / 20.1 mm², 4AWG / 25 mm², 3AWG/33.7 mm², 2AWG / 50 mm², 70 mm², 1AWG / 75 mm², 95.5 mm², 120 mm², 150 mm²
-
Insulation MaterialSiliconeRated Voltage600V
-
ApplicationAuto, Electronics, Medical Equipment, Electric Appliance, Motor Winding, Transformer, Railway, Heating, Industrial, Electrical equipment, equipment wiring, Ectronic internal wiring
-
Conductor TypeStrandedShapeRound
-
Single Wire Size0.1 mm, 0.3mm, 0.2 mm, 0.4mm, 0.5mm, 0.6 mm, 0.8mm, 0.7mm, 0.9 mm, 1.0mm, 1.1 mm, 1.2 mm, 1.3 mm, 1.5 mm, 1.4 mm, 1.6 mm, 1.7 mm, 1.8mm, 2.0 mm, 1.9 mm, 2.2 mm, 2.1 mm, 2.3 mm, 2.4 mm, 2.5 mm, 2.6mm, 2.7 mm, 2.8 mm, 2.9 mm, 3.0mm, Custom, 0.08mm for this wireWorking Temperature0 °C ~ 50 °C, 105 °C, 0 °C ~ 70 °C, 0 °C ~ 90 °C, -20 °C ~ 0 °C, 250°C, -30 °C ~ 105 °C, 50 °C ~ 100 °C, -55℃~150℃, -60℃-200℃, or other, -60℃-200℃ for this wire
-
TypeInsulatedProduct nameSingle core Silicone electric wire
-
PAYMENT TERMS45% deposit in advance,55% balance against B/LDelivery time3day for sample; 7day for bulk order
-
UsageLithium Battery,Inverter,Aviation model,Robot Arm,UAV;ServiceOffer datesheets, sample, testing report,quality system audit report
-
Rolling TypeExport wooden drum/ plastic drum/ wooden box/ iron drum or customSampleExcellent Free Sample Experience
-
OEM ODM AcceptInsulation material/ Conductor Type & construction/Connector/ PackingSize1-30 AWG ( or as your request )
-
FeatureTemperature Resistant ,Oil Resistant,VW-1 FT-1 Flame Resistance
Red and black soft silicone wire is described for battery and inverter connections in the supplied 10AWG/5.3mm² size. The 600 V single-core construction specifies 0.08mm individual wires and a working range from −60°C to 200°C.
Put colour and length on each connection request
Identify the required insulation colour and finished length for each lead. Keep those details with the terminal arrangement and the selected 10AWG/5.3mm² conductor drawing, so the enquiry describes the actual wires required by the battery or inverter.
- Softness is stated for the silicone wire.
- The featured conductor material is tinned copper.
- Custom pure copper or other materials are separate requests.
- The wire is round, stranded and single-core.
- The individual-wire dimension is 0.08mm for this construction.
Set the finished dimensions for terminal fit
Give actual conductor dimensions, strand count and finished insulation diameter. Select the required size from the silicone choices, including the featured 10AWG/5.3mm² pair offered at 1 m.
Describe the battery or inverter duty
State load, continuous duty and routing conditions with the selected lead. The documented −60°C to 200°C working range and stated temperature, oil and flame resistance provide construction information to compare with those requirements. Confirm applicable VW-1/FT-1 report scope where the project requires it.
Agree on the individual lead supply
Request the free sample and its datasheet, test or quality-system audit reports for the selected colour/gauge build. Include quantities, final lengths and custom insulation, conductor, connector or drum/box packing with each lead drawing to define the matched supply request.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
