Series illustrations. Actual configuration is subject to the confirmed drawing.
110V US E12 Lamp-Holder Dimmer Cord | SPT-2 18AWG Copper PVC 1.5m Lighting Lead
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionLamp-holder connection
-
AC Outlets Quantity1 OutletsCable Length1.5 m(4.92ft)
-
End TypeE12Rated Current2.5A
-
TypeAc Power Cord
-
ApplicationHome ApplianceFemale End TypeIEC
-
Male End TypeACMaterialPVC, Copper
-
USB Type-C PortsE12 Lamp HolderWire Typespt-2
The E12 lamp holder and dimmer switch define this black US lighting cord. Its actual 18 AWG selection uses SPT-2 copper/PVC construction, a 1.5 m reach and 110 V, 2.5 A designations for an equipment-specific lamp connection.
Match the lamp to the holder and control
Check the actual E12 lamp base, holder dimensions and required dimmer compatibility together. The selected lamp and control load should be agreed as a pair, with the receiving connection suited to the intended lighting assembly.
Include the source form, conductor roles and finished wiring in that check. These details define the actual connection from the US supply interface through the dimmer to the E12 holder.
Retain the 1.5 m construction
The stated reach equals 4.92 ft. Measure the intended path between source, control position and lamp holder, retaining the 1.5 m length and 18 AWG SPT-2 copper/PVC build in the final specification.
Consider the space around the control and holder when defining the route. Their actual positions and mating requirements belong with the chosen cable construction.
Review the complete lighting load
Agree the complete 110 V and 2.5 A scope across the dimmer, lamp holder, cable and source connection. Match the actual bulb/control demand and installation conditions with that assembly, then bring the source, wiring, holder, control and route into one lighting-cord brief.
Describe the selected lamp and how its control will be used in the receiving assembly. Include the bulb specification with the dimmer requirements, allowing the actual lighting load to be checked against the holder and finished cord.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
