Series illustrations. Actual configuration is subject to the confirmed drawing.
12AWG 3.5mm² Soft Red/Black Silicone Inverter Wire, 600V, −60–200°C
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Nominal sizeMultiple AWG optionsRated voltage600 V
-
Insulation materialSilicone
-
Conductor MaterialTinned Copper(custom Pure Copper or as request )Diameter30AWG, 28AWG, 26AWG, 24AWG / 0.2 mm², 22AWG / 0.3 mm², 20AWG / 0.5 mm², 18AWG / 0.75 mm², 17AWG / 1.0 mm², 16AWG/1.27 mm², 15AWG / 1.5 mm², 14AWG / 2.0 mm², 13AWG / 2.5 mm², 12AWG / 3.5 mm², 11AWG / 4 mm², 10AWG / 5.3 mm², 9AWG / 6.53 mm², 8AWG / 8.3 mm², 7AWG / 12 mm²., 6AWG / 16 mm², 5AWG / 20.1 mm², 4AWG / 25 mm², 3AWG/33.7 mm², 2AWG / 50 mm², 70 mm², 1AWG / 75 mm², 95.5 mm², 120 mm², 150 mm²
-
Insulation MaterialSiliconeRated Voltage600V
-
ApplicationAuto, Electronics, Medical Equipment, Electric Appliance, Motor Winding, Transformer, Railway, Heating, Industrial, Electrical equipment, equipment wiring, Ectronic internal wiring
-
Conductor TypeStrandedShapeRound
-
Single Wire Size0.1 mm, 0.3mm, 0.2 mm, 0.4mm, 0.5mm, 0.6 mm, 0.8mm, 0.7mm, 0.9 mm, 1.0mm, 1.1 mm, 1.2 mm, 1.3 mm, 1.5 mm, 1.4 mm, 1.6 mm, 1.7 mm, 1.8mm, 2.0 mm, 1.9 mm, 2.2 mm, 2.1 mm, 2.3 mm, 2.4 mm, 2.5 mm, 2.6mm, 2.7 mm, 2.8 mm, 2.9 mm, 3.0mm, Custom, 0.08mm for this wireWorking Temperature0 °C ~ 50 °C, 105 °C, 0 °C ~ 70 °C, 0 °C ~ 90 °C, -20 °C ~ 0 °C, 250°C, -30 °C ~ 105 °C, 50 °C ~ 100 °C, -55℃~150℃, -60℃-200℃, or other, -60℃-200℃ for this wire
-
TypeInsulatedProduct nameSingle core Silicone electric wire
-
PAYMENT TERMS45% deposit in advance,55% balance against B/LDelivery time3day for sample; 7day for bulk order
-
UsageLithium Battery,Inverter,Aviation model,Robot Arm,UAV;ServiceOffer datesheets, sample, testing report,quality system audit report
-
Rolling TypeExport wooden drum/ plastic drum/ wooden box/ iron drum or customSampleExcellent Free Sample Experience
-
OEM ODM AcceptInsulation material/ Conductor Type & construction/Connector/ PackingSize1-30 AWG ( or as your request )
-
FeatureTemperature Resistant ,Oil Resistant,VW-1 FT-1 Flame Resistance
Start this inverter-wire enquiry with the route between the actual connection points. The featured lead is 12AWG/3.5mm² soft silicone wire in red or black, described as a round, stranded single-core component.
Define the physical inverter lead
Set the required colour, completed length, conductor dimensions and terminal fit for the chosen connection. The stated construction uses tinned copper and 0.08 mm individual wires; specify the strand count and finished insulation diameter with the same drawing.
- Silicone identifies the insulation material.
- Softness is described for this wire.
- Its electrical designation is 600 V.
- The working-temperature range is −60°C to 200°C.
- A 1 m silicone-wire choice is available.
Relate wire selection to the actual inverter circuit
Give the operating load and continuous duty with the equipment route and terminal arrangement. Use the stated voltage and full temperature range as wire parameters within that specific request. This keeps the physical lead and its intended electrical service together when the selected construction is reviewed.
Choose any material or construction customization
Pure copper or other requested conductor materials are offered as custom alternatives. Include any insulation, conductor-construction or connector changes with the actual dimensions so the proposed sample and supply refer to the same inverter component.
Request matching documentation and supply details
Temperature, oil and flame resistance are described, with applicable VW-1/FT-1 evidence to request as required. Offered support includes free samples, datasheets, testing reports and quality-system audit information. State quantity and the required wooden, plastic or iron drum, box or custom packing with the individual red- or black-lead specification.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
