Series illustrations. Actual configuration is subject to the confirmed drawing.
12V Ring Eyelet Terminal to Female Cigarette-Lighter Socket Fused Car Accessory Power Cord, 1m 10A Fuse Configuration Request
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionRing terminal , Vehicle accessory connection
-
ApplicationCar Battery Charging, Consumer Electronics, Car, phoneMaterialCopper
-
ConnectionRing Terminal
-
FeatureEco-FriendlyInsulationSilicone
-
Length1M(3.28ft)Male End TypeRing Terminal
-
Female End Typecar cigarette lighter socketPlugCigarette Lighter plug
-
Conductor MaterialCopper ,CCA, CCSInsulation MaterialPVC
-
CableSPT-1 SPT-2 18awg/16awgOEM&ODMyes
-
Fuse1A.3A.5A,10A.15AWarranty1 year
A fused vehicle-accessory lead should retain the actual terminal and socket with its selected cable construction. This 12V ring/eyelet-terminal-to-female-cigarette-lighter-socket configuration is a 1m version with a featured 10A fuse request.
Select the actual cable and material build
Agree SPT-1 or SPT-2 with 18AWG or 16AWG wire for the ordered version. Choose copper, CCA or CCS as the actual conductor construction.
Confirm silicone or PVC as the actual insulation construction needed by the lead. Keep those material selections with the same terminal and socket arrangement being ordered.
Agree the complete fuse configuration
Select the actual 1A, 3A, 5A, 10A or 15A fuse version requested for the assembly. Retain the featured 10A requirement with the particular build being confirmed.
Keep the selected fuse with the actual wire, source and connected demand. The fuse and cable should remain part of one complete accessory-lead specification.
Match the ring and female-socket connection
Confirm the actual ring dimensions, female-socket fit and polarity wiring required by the receiving arrangement. Retain both physical connection details in the equipment brief.
Keep the 12V supply requirement with the actual accessory and connected load. The terminal and socket should describe the power path needed by that selected installation.
Set the accessory route
The 1m reach corresponds to approximately 3.28ft. Measure around the actual source and accessory positions with terminal and socket space included.
OEM/ODM inquiries should retain the selected material, wire, fuse and connection mapping with that route. These details define the fused lead requested for the actual vehicle-accessory arrangement.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
