Series illustrations. Actual configuration is subject to the confirmed drawing.
Black US 90-Degree NEMA 5-15P to IEC C13 Workstation Power Cord, 0.6m Three-Core 18AWG Copper PVC 10A 125V Desktop Monitor Printer Lead
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Rated voltage125 VInsulation materialPVC
-
Conductor materialCopper
-
Conductor MaterialCopperInsulation MaterialPVC
-
Rated Voltage125VSizeNO
-
ApplicationHome Appliance
-
IP LevelIP11JacketPVC
-
Rated Current10 ATypeAC Power Cord
-
Working Temperature-25°C ~ 70°CFlame Retardant ClassNot Rated
A workstation lead should retain its actual 90-degree arrangement with the receiving device. This black US NEMA 5-15P-to-C13 cord has 18AWG copper conductors, PVC insulation and jacket, a 0.6m three-core build and a 10A, 125V designation.
Define the workstation connector orientation
Compare the actual desktop-PC, monitor, printer or workstation inlet with the C13 form. Include the NEMA 5-15P supply connection in the same mating requirement.
Keep the 90-degree geometry, connector dimensions and cable direction with that equipment position. The physical pair should describe the actual receiving arrangement being ordered.
Measure the 0.6m equipment path
The short cable reach is approximately 1.97ft. Measure from the real source to the receiving inlet, accounting for both connector bodies in the path.
Retain the actual orientation and device position with that measurement. The route should remain attached to the particular workstation connection served by the lead.
Retain wire and complete electrical demand
Keep the 18AWG copper conductors, PVC insulation/jacket and black finish in the three-core construction. Match the 10A, 125V designation to the actual source and connected equipment load.
Both mates and the wire should form one complete assembly specification. Retain that full electrical requirement with the selected physical arrangement.
Match environment and class requirements
Compare the actual installation environment with the -25°C to 70°C working-temperature designation. Keep that operating requirement with the actual cable route.
Confirm applicable supporting scope for any particular flame class requested by the installation. These details define the 90-degree workstation lead around its full physical and electrical requirement.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
