Series illustrations. Actual configuration is subject to the confirmed drawing.
Black US American Two-Pin to IEC C7 Electric AC Power Cord, STP-1 18AWG Bare Copper 7A 110V Lead in 1m 1.5m 2m 3m Versions for TV Hair Dryer Electronics
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C7Conductor materialBare copper
-
AC Outlets Quantity1 OutletsCable Length1m(3.28ft)
-
End Typec7Rated Current7A
-
TypeAc Power Cord
-
ApplicationComputer, Laptop, Electronic DeviceFemale End TypeIEC
-
IP LevelIP11Male End TypeNema
-
MaterialCopperWire TypeSTP-1
-
Product nameAc 2 Pin Plug 110v Us Power CordConnectorUSA 2pin plug
-
CableSTP-1Cable Gauge18AWG
-
Cable ConductorBare CopperRating110V, 7A
-
Length1m.ColorBlack or White
The black US two-pin-to-IEC-C7 lead uses STP-1 18AWG bare-copper construction with a 7A, 110V designation. Actual 1m, 1.5m, 2m or 3m versions define the selected television, hair-dryer or electronic-equipment connection around its source and receiving device.
Match the actual two-pin and C7 interfaces
Compare the US source and C7 receiving dimensions with the equipment mates being used. Keep both connector bodies attached to the actual source and device positions.
Agree the conductor and wiring arrangement in the complete physical drawing. Those details should represent the selected television, hair-dryer, computer, laptop or electronic-device connection and its receiving requirements.
Select the ordered reach and appearance
Choose actual 1m, 1.5m, 2m or 3m for the required equipment path. Measure with the source and C7 bodies included in the complete cable route.
Retain black STP-1 18AWG bare-copper construction with that selected dimension. Agree a requested white finish if needed for the actual ordered lead and receiving-equipment position.
Keep full rating with the device demand
Retain the complete 7A, 110V requirement across the actual wire and both connection ends. Match that electrical specification to the supply and connected-equipment demand.
Confirm any applicable protection requirements for the particular installation. Keep the actual operating conditions with that same selected wire, mating pair and physical route.
A two-pin C7 inquiry should settle source and receiving geometry, wiring, chosen reach and complete rating together. These details define the requested bare-copper lead around one actual equipment connection, keeping its selected appearance and construction with the full operating requirement of the receiving load.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
