Series illustrations. Actual configuration is subject to the confirmed drawing.
Black US NEMA 1-15P to IEC C7 Figure-Eight Power Lead with Molded Plug, Featured 18AWG SPT-2 Bare Copper PVC 10A 125V Selected-Rating TV Radio DVD Audio Video Request
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C7Conductor materialBare copper
-
AC Outlets Quantity1 OutletsCable Length1.2 m(3.94ft)
-
End TypeC7Rated Current7A, 10 A
-
TypeAc Power Cord
-
ApplicationComputer, Laptop, Electronic DeviceFemale End TypeIEC
-
IP LevelIP11Male End TypeNema
-
MaterialPVCWire TypeSPT-2
-
Product nameUS Approval 2-Prong spt-2 18awg ac power cordConnectorUSA 2pin plug
-
CableSTP-1,STP-2,NSTP-1 or NSTP-2Cable Gauge16AWG or 18AWG
-
Cable ConductorBare CopperRating125V, 10A
-
Certificationusa.RohsLength1m.2m.3m as required
-
ColorBlack or White.Can be customized if QTY up to 3,000pcsskypearon pang
The featured black US figure-eight lead request has a molded NEMA 1-15P source plug and IEC C7 receiving form. Its 18AWG SPT-2 bare-copper/PVC construction carries a requested 10A, 125V configuration for TV, radio, DVD or audio/video equipment.
Match the actual molded source plug
Confirm the physical molded plug geometry against the actual source connection. Retain the C7 receiving form with the equipment inlet being connected.
Keep both mating bodies and the source/receiver positions in one assembly drawing. The actual plug form should stay with the selected cable route.
Select full current and precise wire
Agree actual 7A or 10A for the complete 125V lead. Match the selected current to the wire, mating ends and connected-equipment demand.
Retain featured 18AWG or requested 16AWG with the exact cable designation. Agree SPT-2 or the requested STP-1, STP-2, NSTP-1 or NSTP-2 code for that ordered construction.
Set exact reach around the equipment
Confirm actual 1.2m, approximately 3.94ft, or a requested 1m, 2m, 3m or other length. Measure the required source-to-inlet route with both connector bodies included.
Keep the selected molded plug and actual equipment positions attached to that dimension. The wire and precise reach should describe the same physical lead.
Close finish and required scope
Retain the featured black finish or agree a white finish request with the selected assembly. Confirm applicable approval or protection scope if the installation requires it.
The final molded-plug brief should settle mates, full rating, wire code, gauge, exact reach and demand. These selections define one actual equipment connection for the requested C7 cable.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
