Series illustrations. Actual configuration is subject to the confirmed drawing.
Black US Three-Prong Right-Angle NEMA 5-15P to IEC C13 Power Cord, 0.6m Three-Core 18AWG Copper PVC 10A 125V Desktop Monitor Printer Server Workstation Lead
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Rated voltage125 VInsulation materialPVC
-
Conductor materialCopper
-
Conductor MaterialCopperInsulation MaterialPVC
-
Rated Voltage125VSizeNO
-
ApplicationHome Appliance
-
IP LevelIP11JacketPVC
-
Rated Current10 ATypeAC Power Cord
-
Working Temperature-25°C ~ 70°CFlame Retardant ClassNot Rated
A three-prong equipment lead should keep its actual angled arrangement with the device served by the cable. This black US NEMA 5-15P-to-C13 cord has 0.6m three-core construction, 18AWG copper conductors, PVC insulation/jacket and a 10A, 125V designation.
Identify the receiving equipment position
Compare the C13 end with the desktop-PC, monitor, printer, server or workstation inlet. Include the actual NEMA 5-15P supply form used by the installation.
Retain both mates with the device and its physical position. A general equipment category should accompany the actual receiving connection needed by the lead.
Define the angled cable path
Specify the actual connector dimensions and cable direction required at that position. Measure the path against the 0.6m dimension, approximately 1.97ft.
Account for both connector bodies in the route. The physical angle and path should describe the same pair as the requested cable.
Retain the complete electrical construction
Keep the black three-core 18AWG copper conductors with the PVC insulation and jacket. Match the 10A, 125V designation to the actual source and equipment demand.
Both mating ends and the wire should remain in one complete assembly requirement. Retain the receiving-device load with that selected physical arrangement.
Match the environment and required class
Compare the actual environment with the -25°C to 70°C working-temperature designation. Keep that operating requirement with the equipment route.
Agree applicable supporting scope for any particular flame class required by the installation. These details define the short angled lead around the actual computer, server or workstation connection.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
