Series illustrations. Actual configuration is subject to the confirmed drawing.
EU 12V 1A 12W Wall Switching AC/DC Barrel-Plug Power Adapter
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Interface TypeDC PlugOutput Current1.0A
-
Output Voltage12 VPlug StandardEU
-
ApplicationSwitching
-
Cable Length1m, 1.2 m, 1.5 m, 1.8 m , 2 metersConnectionPlug In
-
Frequency50 Hz, 60 HzMaterialPVC
-
Output TypeDCCable2464/2468 20/22AWG
-
Input voltage240V, AC100~240VOutput plug5.5*2.5mm, 4.0*1.7mm, 3.5*1.35mm or others
-
Cable length1m, 2m, or customizedAC leakage Current0.25mA Max .At 240V ac input
-
Short circuit protectAuto RecoveryOver voltage protection120% min
-
Over current protection120% minSafety approvalFCC CE
-
Warranty12 Months
This EU wall switching AC/DC adapter has a 12V/1A reference and an actual black 12W choice for LED and electronic power connections. Its input information specifies 100–240V AC, with 50/60Hz and stated protection/leakage references accompanying the selected adapter configuration.
Match the known output and DC barrel end
Keep 12V/1A and the actual 12W version together when reviewing the receiving equipment's required supply. DC mating alternatives include 5.5×2.5mm, 4.0×1.7mm and 3.5×1.35mm, requiring the chosen dimensions and polarity to match the device socket. Record the approved output and end arrangement together so that the exact adapter connection can be reviewed against the LED or electronic equipment.
Review the protection and leakage conditions
Short-circuit protection has an auto-recovery description, while overvoltage and overcurrent each carry a 120%-minimum reference. Leakage is specified as 0.25mA maximum at 240V AC input, with the selected conditions to retain in the electrical specification. Agree the receiving-load requirements and applicable protection conditions, then request the relevant FCC/CE information for the chosen adapter construction.
Specify the PVC wire and cable layout
The family describes generic PVC material and 2464/2468 20/22AWG cable, with 1m, 1.2m, 1.5m, 1.8m, 2m or custom physical requirements. Agree the selected material role and complete plug/cable/end construction around the equipment. Finish the black 12V/1A/12W version with the approved input, DC mating, required acceptance information and quantity, retaining one complete electrical and physical configuration for procurement.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
