Series illustrations. Actual configuration is subject to the confirmed drawing.
Fused Alligator-Clip to Female Cigarette-Lighter Battery Adapter, 30A Reference 12–24V Copper/ABS 18AWG 2-Core 1m
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Nominal size18 AWGInsulation materialPVC
-
ApplicationCar Battery Charging, ChargerInsulation PropertyEco-Friendly
-
MaterialABS,CopperWire Diameter4.7-5.1 mm(0.19-0.20in)
-
ConnectionAlligator Clips Plug
-
FeatureEco-FriendlyInsulationInsulating PVC
-
Length1m(3.28ft)Rated Current30A
-
Plug Diameter4mm(0.16in)Size18AWG/2C
-
Product typeBattery clips to socket Charger adapterUsageAutomotive Connectors
-
ColorRed+Black,BlackFemale EndCigar lighter female
-
CableSPT-2 18AWG/2CCertificateCE.ROHS.FCC
-
Warranty24 monthsCable length1m
-
Rating12-24V
This fused alligator-to-female-cigarette-lighter battery-adapter family has copper/ABS construction, PVC insulation and an SPT-2 18AWG/two-core reference. The red/black selection accompanies a 1m physical length and 12–24V rating reference. Review the 30A product-current reference with the selected duty, cable/fuse arrangement and intended equipment before completing the exact assembly.
Match the current reference and chosen fuse
Retain the product's 30A current reference with the required current and duty conditions for the selected equipment. Agree the exact fuse value/type and its coordination with the chosen 18AWG two-core construction. Keep those complete electrical requirements with the 12–24V reference on the approved assembly drawing.
Define the connector and material roles
Show the alligator clips and female cigarette-lighter socket on the end drawing. Agree the copper/ABS material roles and PVC insulation with the complete selected construction. Confirm the dimensional roles of the 4.7–5.1mm wire and 4mm plug references before finalizing the finished geometry and preparation details.
Match polarity and equipment connections
Confirm the pin/clip polarity against the actual source and accessory equipment. Review installation information applicable to the selected battery-charging connection lead. Retain the approved fuse/current-duty and full end arrangement together when the compatible equipment connections are agreed.
Complete physical and document requirements
Agree the number of red/black 1m leads required with the approved selected construction. Review any required CE, RoHS or FCC documents for the exact assembly and acceptance scope. Keep those requirements beside the dimensioned pin/material drawing and physical schedule, using the same chosen current/fuse arrangement throughout the final request.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
