Series illustrations. Actual configuration is subject to the confirmed drawing.
Fused UK BS1363 to IEC C7 TV Power Cord, 250V Copper/PVC
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Nominal size0.75 mm²Rated voltage250 V
-
Insulation materialPVCConductor materialCopper
-
Conductor MaterialCopperInsulation MaterialPVC
-
Rated Voltage250 VSize1*0.75 mm²
-
ApplicationOther
-
IP LevelIP44JacketPVC
-
Rated Current10 ATypeLow Voltage
-
Flame Retardant ClassClass AProduct nameuk figure 8 power cord bsi approval
-
CableH03VVH2-F/H05VVH2-F 2*0.5mm/0.75mm/1.5mmConductorCopper
-
Length1.8m, optionalPlug 1BS1363 plug
-
Plug 2IEC C7Colorwhite/black, optional
-
PackingPE bag + cartonFree sample1-3pcs
-
Warranty12 months
The two ends define this television replacement lead: a fused three-pin UK BS1363 supply plug and an IEC C7 figure-eight equipment connector. Copper conductors are combined with PVC insulation and a PVC jacket, with 250 V and 10 A designations for the cord.
Match the C7 connection to the television
Check the television or its power supply for the required inlet profile and electrical demand. Keep the exact C7 mating shape with the supply-plug specification when requesting the replacement, so the connection is defined at both ends of the route.
Keep length and cable construction together
The selectable combination is 1 m with two cores. An optional 1.8 m length and white or black colour requests are described separately; identify the required finished version when preparing the inquiry.
- A fused BS1363 plug provides the specified UK supply end.
- IEC C7 identifies the figure-eight equipment connector.
- Copper and PVC specify the conductor, insulation and jacket materials.
- The featured selection pairs 1 m with a two-core arrangement.
- H03VVH2-F/H05VVH2-F and the stated size references require a selected build.
Complete the fuse and acceptance requirements
Choose the fitted fuse against the equipment demand, keeping that value separate from the cord's 10 A designation. Confirm the ordered conductor section and cable family with the complete two-core specification. If the television project requires BSI approval, a defined flame criterion or ingress protection, include the applicable model documents and assembly conditions in the acceptance request. These details give the selected TV lead a specific electrical and physical scope.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
