Series illustrations. Actual configuration is subject to the confirmed drawing.
OEM ODM Black US Right-Angle NEMA 5-15P to IEC C13 Power Cord, 0.6m Three-Core 18AWG Copper PVC 10A 125V PC Monitor Server Printer Lead
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Rated voltage125 VInsulation materialPVC
-
Conductor materialCopper
-
Conductor MaterialCopperInsulation MaterialPVC
-
Rated Voltage125VSizeNO
-
ApplicationHome Appliance
-
IP LevelIP11JacketPVC
-
Rated Current10 ATypeAC Power Cord
-
Working Temperature-25°C ~ 70°CFlame Retardant ClassNot Rated
An OEM/ODM equipment brief should keep the actual angled connection with its cable and receiving position. This black US NEMA 5-15P-to-C13 cord has 0.6m three-core construction, 18AWG copper conductors, PVC insulation/jacket and a 10A, 125V designation.
Define the actual OEM mating geometry
Compare the C13 receiving form with the PC, monitor, server or printer inlet. Retain the NEMA 5-15P source form used by that equipment assembly.
Keep the angled connector dimensions and cable direction with the physical pair. The OEM/ODM requirement should identify the actual receiving arrangement needed by the lead.
Set route and operating environment
The actual 0.6m reach is approximately 1.97ft. Measure around the source and receiving-equipment positions, accounting for both connector bodies.
Match the -25°C to 70°C working-temperature designation to the actual installation environment. Keep that environment with the selected route and device position.
Retain construction and complete demand
Keep the 18AWG copper conductor requirement with the PVC insulation/jacket and black three-core build. Match the 10A, 125V designation to the actual source and receiving-device load.
Both connection ends and the cable should form one complete ordered assembly. Agree applicable supporting scope for any particular flame-class requirement.
A practical equipment inquiry identifies the mates, angled geometry, route, construction, electrical demand and environment together. These details define the requested short OEM/ODM lead around one complete physical and electrical requirement for its actual PC, server or printer installation.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
