Series illustrations. Actual configuration is subject to the confirmed drawing.
Red and Black 10AWG/5.3mm² 600V 200°C Silicone Inverter Connection Wire with 0.08mm Individual Wires
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Nominal sizeMultiple AWG optionsRated voltage600 V
-
Insulation materialSilicone
-
Conductor MaterialTinned Copper(custom Pure Copper or as request )Diameter30AWG, 28AWG, 26AWG, 24AWG / 0.2 mm², 22AWG / 0.3 mm², 20AWG / 0.5 mm², 18AWG / 0.75 mm², 17AWG / 1.0 mm², 16AWG/1.27 mm², 15AWG / 1.5 mm², 14AWG / 2.0 mm², 13AWG / 2.5 mm², 12AWG / 3.5 mm², 11AWG / 4 mm², 10AWG / 5.3 mm², 9AWG / 6.53 mm², 8AWG / 8.3 mm², 7AWG / 12 mm²., 6AWG / 16 mm², 5AWG / 20.1 mm², 4AWG / 25 mm², 3AWG/33.7 mm², 2AWG / 50 mm², 70 mm², 1AWG / 75 mm², 95.5 mm², 120 mm², 150 mm²
-
Insulation MaterialSiliconeRated Voltage600V
-
ApplicationAuto, Electronics, Medical Equipment, Electric Appliance, Motor Winding, Transformer, Railway, Heating, Industrial, Electrical equipment, equipment wiring, Ectronic internal wiring
-
Conductor TypeStrandedShapeRound
-
Single Wire Size0.1 mm, 0.3mm, 0.2 mm, 0.4mm, 0.5mm, 0.6 mm, 0.8mm, 0.7mm, 0.9 mm, 1.0mm, 1.1 mm, 1.2 mm, 1.3 mm, 1.5 mm, 1.4 mm, 1.6 mm, 1.7 mm, 1.8mm, 2.0 mm, 1.9 mm, 2.2 mm, 2.1 mm, 2.3 mm, 2.4 mm, 2.5 mm, 2.6mm, 2.7 mm, 2.8 mm, 2.9 mm, 3.0mm, Custom, 0.08mm for this wireWorking Temperature0 °C ~ 50 °C, 105 °C, 0 °C ~ 70 °C, 0 °C ~ 90 °C, -20 °C ~ 0 °C, 250°C, -30 °C ~ 105 °C, 50 °C ~ 100 °C, -55℃~150℃, -60℃-200℃, or other, -60℃-200℃ for this wire
-
TypeInsulatedProduct nameSingle core Silicone electric wire
-
PAYMENT TERMS45% deposit in advance,55% balance against B/LDelivery time3day for sample; 7day for bulk order
-
UsageLithium Battery,Inverter,Aviation model,Robot Arm,UAV;ServiceOffer datesheets, sample, testing report,quality system audit report
-
Rolling TypeExport wooden drum/ plastic drum/ wooden box/ iron drum or customSampleExcellent Free Sample Experience
-
OEM ODM AcceptInsulation material/ Conductor Type & construction/Connector/ PackingSize1-30 AWG ( or as your request )
-
FeatureTemperature Resistant ,Oil Resistant,VW-1 FT-1 Flame Resistance
Red and black 10AWG/5.3mm² silicone wire is presented for inverter connections with a 600V rating and a −60°C to 200°C working range. Its round, stranded single-core construction specifies 0.08mm individual wires. The conductor is tinned copper, with custom pure copper or requested alternatives also available for discussion.
Identify the red or black inverter component being supplied
Specify each required colour and finished length alongside actual conductor dimensions and strand count. Give finished silicone diameter and terminal fit for that individual lead. The component drawing should keep these dimensions with its required quantity so the sample and quotation address the same inverter connection.
Set the actual inverter duty alongside the known thermal range
Provide circuit load, continuous duty and surroundings along the intended route. Temperature, oil and flame resistance are included in this inverter-wire specification. Add the equipment's electrical or material requirements to the selected conductor and insulation when assessing the lead against the actual connection conditions.
Request evidence for the chosen 10AWG inverter lead
A 1m silicone offering includes the 10AWG/5.3mm² size. Request the free sample and its datasheet with the test or quality-system audit documents relevant to the inverter project. If VW-1 or FT-1 evidence is needed, define the applicable report scope for that same finished wire.
Carry each colour's drawing through to the supply enquiry
State total quantities and finished lengths for the proposed red or black leads. Discuss custom insulation, conductor type and construction, connectors and drum, box or requested packing around the individual inverter-component drawing. Obtain supply details that follow the reviewed terminal dimensions and actual operating duty, together with the selected construction's sample and document requirements.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
