Start with the equipment inlet when choosing this EU-to-right-angle IEC C7 power lead. The angled C7 end is the defining connection, paired with a CEE 7/16 two-pin supply plug and black lead-length choices for the required appliance or computer setup.
Check the angle at the C7 inlet
The right-angle equipment connector should match the orientation and available space around the actual C7 connection. Compare the inlet position with the required cable exit direction, then confirm the plug geometry for the device. This gives the connection request a defined orientation as well as the correct connector type.
One conductor area across three lengths
The black versions use the 0.75 mm² conductor-area option at 1 m, 1.8 m or 2 m. Choose the reach required between the EU outlet and equipment, taking account of the intended route around the enclosure. State the selected length and angled C7 arrangement together when requesting the lead.
PVC and H03VVH2-F construction
PVC and H03VVH2-F wiring form the specified construction, with a 2.5 A current designation for the cord. Confirm the complete lead rating and the equipment requirements for the ordered version. The conductor configuration, length and actual connection should be considered together when defining the appliance power path.
Make the EU equipment request precise
Include the CEE 7/16 supply plug, right-angle C7 end, black color and chosen reach in the same brief. Confirm the cord voltage rating and the device inlet clearance before final selection. That combination keeps a 1 m, 1.8 m or 2 m request focused on the specific angled connection the equipment needs.