Series illustrations. Actual configuration is subject to the confirmed drawing.
Soft Red and Black 4AWG/25mm² 600V 200°C Silicone Inverter Cable with 0.08mm Individual Wires
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Nominal sizeMultiple AWG optionsRated voltage600 V
-
Insulation materialSilicone
-
Conductor MaterialTinned Copper(custom Pure Copper or as request )Diameter30AWG, 28AWG, 26AWG, 24AWG / 0.2 mm², 22AWG / 0.3 mm², 20AWG / 0.5 mm², 18AWG / 0.75 mm², 17AWG / 1.0 mm², 16AWG/1.27 mm², 15AWG / 1.5 mm², 14AWG / 2.0 mm², 13AWG / 2.5 mm², 12AWG / 3.5 mm², 11AWG / 4 mm², 10AWG / 5.3 mm², 9AWG / 6.53 mm², 8AWG / 8.3 mm², 7AWG / 12 mm²., 6AWG / 16 mm², 5AWG / 20.1 mm², 4AWG / 25 mm², 3AWG/33.7 mm², 2AWG / 50 mm², 70 mm², 1AWG / 75 mm², 95.5 mm², 120 mm², 150 mm²
-
Insulation MaterialSiliconeRated Voltage600V
-
ApplicationAuto, Electronics, Medical Equipment, Electric Appliance, Motor Winding, Transformer, Railway, Heating, Industrial, Electrical equipment, equipment wiring, Ectronic internal wiring
-
Conductor TypeStrandedShapeRound
-
Single Wire Size0.1 mm, 0.3mm, 0.2 mm, 0.4mm, 0.5mm, 0.6 mm, 0.8mm, 0.7mm, 0.9 mm, 1.0mm, 1.1 mm, 1.2 mm, 1.3 mm, 1.5 mm, 1.4 mm, 1.6 mm, 1.7 mm, 1.8mm, 2.0 mm, 1.9 mm, 2.2 mm, 2.1 mm, 2.3 mm, 2.4 mm, 2.5 mm, 2.6mm, 2.7 mm, 2.8 mm, 2.9 mm, 3.0mm, Custom, 0.08mm for this wireWorking Temperature0 °C ~ 50 °C, 105 °C, 0 °C ~ 70 °C, 0 °C ~ 90 °C, -20 °C ~ 0 °C, 250°C, -30 °C ~ 105 °C, 50 °C ~ 100 °C, -55℃~150℃, -60℃-200℃, or other, -60℃-200℃ for this wire
-
TypeInsulatedProduct nameSingle core Silicone electric wire
-
PAYMENT TERMS45% deposit in advance,55% balance against B/LDelivery time3day for sample; 7day for bulk order
-
UsageLithium Battery,Inverter,Aviation model,Robot Arm,UAV;ServiceOffer datesheets, sample, testing report,quality system audit report
-
Rolling TypeExport wooden drum/ plastic drum/ wooden box/ iron drum or customSampleExcellent Free Sample Experience
-
OEM ODM AcceptInsulation material/ Conductor Type & construction/Connector/ PackingSize1-30 AWG ( or as your request )
-
FeatureTemperature Resistant ,Oil Resistant,VW-1 FT-1 Flame Resistance
Soft red and black 4AWG/25mm² silicone cable is presented for inverter connections at 600V. A −60°C to 200°C working range and 0.08mm individual wires are specified for the round, stranded single-core construction. Tinned copper is described, with custom pure copper or requested conductor materials also available for discussion.
Define the actual red or black lead needed by the inverter assembly. Its finished dimensions and operating duty should remain with the selected construction when reviewing the sample and corresponding supply quantities.
Specify the individual 4AWG inverter lead and its terminals
Give each required colour and length alongside actual copper dimensions and strand count. Add finished silicone diameter and terminal fit to the component drawing. A 1m silicone offering includes the 4AWG/25mm² size, so the enquiry can identify both the particular construction and its finishing requirements.
Set the inverter circuit conditions for the chosen soft cable
Provide load, continuous duty and surroundings along the intended inverter route. Oil and flame resistance accompany the specified thermal construction of this soft lead. Include the equipment's electrical or material requirements when assessing the proposed conductor and insulation against the actual connection duty.
Carry the coloured lead drawing into sample and supply review
Request the offered free sample with its datasheet and the test or quality-system audit documents relevant to that inverter component. Where VW-1 or FT-1 evidence is needed, define applicable report scope for the same finished wire. Keep the selected colour and terminal dimensions with those document requirements.
State total quantities and finished lengths for the red or black leads. Discuss custom insulation, conductor type and construction, connectors and drum, box or requested packing for supply matched to the actual inverter drawing and reviewed operating conditions.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
