Series illustrations. Actual configuration is subject to the confirmed drawing.
US Two-Pin NEMA 1-15P to IEC C7 Figure-Eight Equipment Power Cord, Featured 18AWG SPT-2 Bare Copper PVC 10A 125V Selected-Rating Request for TV DVD Radio Audio
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C7Conductor materialBare copper
-
AC Outlets Quantity1 OutletsCable Length1.2 m(3.94ft)
-
End TypeC7Rated Current7A, 10 A
-
TypeAc Power Cord
-
ApplicationComputer, Laptop, Electronic DeviceFemale End TypeIEC
-
IP LevelIP11Male End TypeNema
-
MaterialPVCWire TypeSPT-2
-
Product nameUS Approval 2-Prong spt-2 18awg ac power cordConnectorUSA 2pin plug
-
CableSTP-1,STP-2,NSTP-1 or NSTP-2Cable Gauge16AWG or 18AWG
-
Cable ConductorBare CopperRating125V, 10A
-
Certificationusa.RohsLength1m.2m.3m as required
-
ColorBlack or White.Can be customized if QTY up to 3,000pcsskypearon pang
The featured US two-pin equipment-lead request connects a NEMA 1-15P source to an IEC C7 figure-eight receiving interface. Its 18AWG SPT-2 bare-copper/PVC construction has a requested 10A, 125V configuration for TV, DVD, radio or audio equipment.
Confirm actual source and receiving geometry
Match the NEMA source form to the actual supply connection. Compare the C7 receiving interface with the equipment inlet being powered.
Retain both physical mating forms and connector bodies in the assembly plan. Keep the source and receiving-equipment positions attached to that selected connection.
Define exact reach and appearance
Agree actual 1.2m, approximately 3.94ft, or a requested 1m, 2m, 3m or other cable reach. Measure the required path around the actual equipment positions.
Specify black or white as the finish request for that assembly. Retain the chosen appearance and precise route with the same actual wire and full rating.
Set the complete current and wire designation
Confirm actual full 7A or 10A for the chosen 125V lead. Keep that requirement with the actual wire, both mates and connected-equipment demand.
Retain featured 18AWG or choose requested 16AWG with the precise SPT-2 or requested STP-1, STP-2, NSTP-1 or NSTP-2 code. Confirm applicable approval or protection scope if required for the selected installation.
A two-pin C7 brief should identify mates, exact reach, finish, complete current, wire code and equipment load together. These details define the requested power lead around one actual physical connection and its selected operating requirement.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
