Series illustrations. Actual configuration is subject to the confirmed drawing.
USB-A to DC5521 Male Barrel Power Charging Cable | PVC Selected 5V 2A and 80cm Reach
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionDC connector
-
TypeMicro USB Type A
-
BrandReliaPackagingpe bag
-
Descriptiondc cableMfg. Date Code2
-
Rated Current2aInstallationplug in
-
MaterialPVCOperating Temperature90
-
Connector TypedcNumber of Pins2
-
ShieldingnoNumber of Ports2
-
Voltage Rating5vPins2P
-
Length1m(3.28ft)TerminalsSolder
-
Product TypeUsb To Dc Extension CablePlug/ConnectorUSB PLUG dc plug
-
Cable20awg-24awgoutput5v
-
ApplianceGPS /Car/ DVR/ Wifi Modeminput5v
-
colorblue,white,black,customizedlength1m,2.5m,5m,10m,customized
-
connector platednickle,gold
This PVC USB-to-DC extension request features a DC5521 male barrel connection and 5 V input/output requirements. A 2 A current requirement accompanies plug-in power use for GPS, car-DVR or Wi-Fi modem equipment, with the actual USB interface and supplied reach to be agreed.
Confirm which USB end is required
Resolve the USB-A versus Micro-USB-Type-A interface before selecting the supplied cable. Identify the actual receiving source connection, connector geometry and pin assignment with the intended power path.
Keep the DC5521 male barrel and its receiving socket in that same mating brief. Confirm barrel dimensions and polarity with the connected device so both ends describe the actual assembly.
Agree the physical cable reach
Resolve the featured 80 cm requirement against the one-meter requirement and requested 2.5, 5, 10 m or custom lengths. Measure the intended equipment route and name the exact supplied dimension and unit.
Associate that reach with the selected 20–24 AWG wire construction. The finished cable length and wire specification should be agreed together for the actual source/load connection.
Retain the soldered termination details
Include solder termination and identify where the two-port/two-pin component requirements apply. Select blue, white, black or custom finish with nickel or gold connector plating, keeping the actual wiring and complete USB/DC interfaces clear.
Check the equipment power requirement
Match the selected source and GPS, DVR or modem input with the complete 5 V/current requirement. Agree applicable operating conditions and complete the brief with interface, barrel polarity, wire, termination, reach and finish for the supplied power lead.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
