VLV32 4-Core 50mm2 Aluminum PVC-Insulated Steel-Wire Armoured Power Cable 0.6/1kV IEC 60502

This four-core VLV32 electric power cable has aluminum conductors, PVC insulation and steel-wire armour, rated 0.6/1kV. Its technical selection is 50mm2. Complete the actual conductor allocation and outer construction required by the project circuit, keeping the aluminum material and SWA build with the equipment connection design.

Allocate the four aluminum conductors

Record each conductor's electrical duty, required section and equipment connection on the circuit drawing. Retain that individual allocation beside the four-core 50mm2 selection when reviewing terminations. The resulting configuration should identify all connection requirements before cable-end preparation and physical quantities are agreed. Define the actual section requirements separately from physical cut length and any preparation allowance needed at the equipment.

Retain PVC insulation and steel-wire armour

Keep conductor aluminum, PVC insulation and steel-wire armour separately identified while agreeing the final sheath on the full construction drawing. Compare cable alternatives against that complete material reference. Review preparation and compatible SWA cable ends for the selected build, obtaining installation information applicable to that construction. Consider the intended route, equipment access and available space to prepare and connect both ends using the same approved cable reference.

Complete exact project and quantity details

Identify the required IEC 60502 part, edition and acceptance conditions if that scope is specified by the project. Review selected-build documents for the relevant installation. Give physical cable cut length independently of the 50mm2 conductor-area notation, including the approved allocation, final sheath and agreed cable ends with the quantities. Retain the circuit drawing and complete steel-wire construction beside the exact project criterion so the purchase identifies one selected cable configuration.