Series illustrations. Actual configuration is subject to the confirmed drawing.
3m Dash Cam Hardwire Converter Kit | 12V-24V to 5V 3A Angled Micro USB-C Low-Voltage Build
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Insulation materialPVCConductor materialCopper
-
Conductor MaterialCopperInsulation MaterialPVC
-
Rated Voltage12VSize3m(9.84ft)
-
ApplicationAutomotive Wiring, Building, Industrial
-
IP LevelIP44JacketPVC
-
Rated Current3ATypeLow Voltage
-
Working Temperature-25°C ~ 70°CFlame Retardant ClassNot Rated
This black dash-cam hardwire kit combines a three-meter copper/PVC two-core build with a DC-DC power-conversion role. The featured electrical arrangement is 12–24 V input to 5 V/3 A output, with low-voltage protection retained for the selected camera installation.
Choose the camera-end orientation
Actual output choices are angled Micro-USB, Type-C and angled Type-C, each with the featured 5 V/3 A output. Match the chosen connector with the camera socket and check the direction in which the cable must leave the device.
Agree the physical angle and receiving-interface geometry for that camera position. This keeps connector selection tied to the available space and actual routing requirement.
Lay out the three-meter power route
The actual cable reach is 3 m, equivalent to 9.84 ft, with two-core construction. Identify the route between the vehicle power connection and camera while retaining the black finish, copper conductors and PVC insulation/jacket.
Define input and protection behavior
Confirm the actual vehicle input connection and pin assignment for the selected hardwire arrangement. Match complete input/output voltage and current scope with the receiving camera load.
Retain low-voltage protection and agree the actual cutoff behavior for the chosen installation. The input, load and protection conditions should form one electrical specification for the supplied converter kit.
Review installed operating conditions
Identify the ingress, temperature and fire conditions required by the actual installation and obtain applicable support where needed. Complete the brief with camera-end choice, angle, vehicle wiring, three-meter route and low-voltage behavior so the selected kit has a defined physical and operating arrangement.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
