Series illustrations. Actual configuration is subject to the confirmed drawing.
4ft 18AWG NEMA 5-15P to IEC60320 C13 Workstation POS Power Cord, SJT Bare Copper PVC 10A 125V Desktop Monitor Lead
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C13Conductor materialBare copper
-
AC Outlets Quantity1 OutletsCable Length1.22 m(4ft)
-
End TypeC13Rated Current10 A
-
TypeExtension Cord
-
ApplicationHome ApplianceFemale End TypeIEC
-
IP LevelIP11Male End TypeNema
-
MaterialPVCWire TypeSJT
-
typeUS Power Extension CordconnectorNEMA 5-15P Plug
-
cable16awg ,18awg,14awgConductorBare copper
-
Rating125V,10AEndIEC C13 Connector
-
ApplicatonHome appliance, Laptop, PC, ComputerLengthCan be customized
-
colorWhite, black, grey,etcCertificateYes
A workstation or POS power connection should be defined by its actual inlet and source. This three-prong NEMA 5-15P-to-IEC60320 C13 lead has featured 18AWG SJT bare-copper/PVC construction, a 1.22m/4ft reach and a 10A, 125V designation.
Identify the actual receiving connection
Check the C13 end against the monitor, workstation, POS or desktop-equipment inlet. Keep the particular receiving unit with the NEMA 5-15P source requirement.
The device category should support the actual mating specification. Include the inlet detail so the ordered cord has a clear source-to-equipment connection.
Retain the wire construction and rating
The featured cable uses 18AWG SJT with bare copper and PVC material. Match the 10A, 125V designation to the actual equipment demand across the selected cable and both ends.
Alternative 16AWG or 14AWG construction can be agreed as a particular version. Keep that wire requirement with the complete assembly rather than treating several gauges as one build.
Plan the workstation equipment route
The featured length is 1.22m, equivalent to 4ft. Measure the intended cable path and include the source and receiving-connector positions.
Custom reach and white, black or grey finish requests can be specified with the selected construction. Define the particular route and finish required by the receiving arrangement.
A practical workstation or POS inquiry should state both mates, gauge, wire family, finish, reach and connected demand. These details define the equipment lead around its actual installation and keep the physical connection with one complete electrical specification.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
