Connect the required UK mains plug with the correct equipment inlet when specifying this fused Type G-to-IEC C13 power cord. H05VV-F cable and PVC construction form the cord build for a compatible computer or equipment power connection.
A fused Type G supply connection
The UK plug is described as a fused Type G design with a BS1363 reference. Specify the fuse value required for the actual cord and equipment configuration, then confirm that value as part of the complete assembly. Keep the plug, fuse and cable requirements together when selecting a version.
Match the device at the C13 end
The IEC C13 equipment connector is the relevant mating point for this lead. Server, PDU, UPS, printer and computer uses depend on the actual inlet and electrical requirements of the device. Check that inlet and the space around the connection before choosing a UK-to-C13 lead for the installation.
Choose the reach of the UK lead
Length choices include 0.5 m, 1 m, 1.2 m, 1.5 m, 1.8 m, 3 m and 5 m. State the reach needed between the UK outlet and equipment, including the route through the intended workspace or enclosure. A clear length request helps distinguish the required lead from another UK/C13 configuration.
Confirm the complete electrical build
A 10 A current designation and 250 V product designation accompany this H05VV-F cord. Confirm the conductor construction and complete assembly rating for the intended device, alongside the actual fuse specification. The final UK/C13 request should identify the supply plug, equipment end, lead length and electrical build as one matched configuration.
