A battery-management-system or inverter connection starts with the required cable size and circuit duty. This flexible AWM3135 silicone battery-cable request uses the supplied 1/0AWG and 53mm² references, with a 600 V designation for the described component.
The wire is round, stranded and single-core. Tinned copper, pure copper or a requested conductor material can be specified with the selected construction.
Use the exact aught or area requirement
Keep 1/0AWG distinct from 1AWG when describing the lead. State whether the request is based on the aught gauge or the supplied 53mm² area, then confirm the conductor dimensions, strand count and finished silicone insulation diameter on the drawing.
- AWM3135 is the requested wire-style reference.
- Silicone is the stated insulation material.
- Flexible construction is named for the battery cable.
- The component has a 600 V designation.
- A 1 m length option is offered for enquiries.
Size the request around the battery-system route
Provide actual load, continuous duty, routing distance and both limits of the working-temperature range. Dimension requests for individual wire include 0.1 to 3.0 mm and custom values; settle their meaning within the selected conductor build instead of treating them as the finished battery cable's outside diameter.
Compare the proposed construction before ordering
Stated temperature, oil and flame resistance can be reviewed against the project, including applicable VW-1/FT-1 scope where needed. Ask for the free sample and its technical, testing and quality-system audit material. Include required lead lengths, quantity and any custom insulation, conductor, connector or drum/box packing with the BMS or inverter connection specification.
