Series illustrations. Actual configuration is subject to the confirmed drawing.
Black EU CEE7/7 22K NTC Temperature-Sensor EV Charger Input Power Cable, 0.9m H05VV-F 2.5mm² Three-Core Plus 28AWG Two-Core 16A 250V Configuration Request
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
AC Outlets Quantity1 OutletsCable Length0.9 m(2.95ft)
-
End TypeOpen, terminals, housingRated Current16 A
-
TypeAc Power Cord
-
ApplicationHome Appliance, Consumer Electronics, Computer, Industrial Equipment, Instrumentation, TelecommunicationFemale End TypeStripped
-
IP LevelN/AMale End TypeCEE
-
MaterialPVCUSB Type-C PortsN/A
-
Wire TypeH05VV-FCableH05VV-F 2.5mm2/3C +28AWG/2C
-
Other CableH07RN-F H07RR-F H05VV-F 1.0mm2/3C 1.5mm2/3C 2.5mm2/3CNTC22K
An EV-charger input lead with NTC temperature sensing should be matched to the receiving controller and actual cable assembly. This black EU CEE7/7 configuration features a 22K NTC designation, 0.9m reach, PVC material and H05VV-F 2.5mm² three-core wiring plus a 28AWG two-core section, with a requested 16A, 250V designation.
Select the actual cable construction
Choose the EU 0.75, 1.0, 1.5 or 2.5mm² three-core version with the 28AWG two-core wiring. Keep the actual cross-section and complete wire arrangement with the selected plug and receiving equipment.
H07RN-F, H07RR-F or H05VV-F 1.0, 1.5 or 2.5mm² three-core cable requests should be agreed individually. Retain the actual family with the complete input-lead configuration being ordered.
Agree the NTC and controller interface
Match the 22K NTC reference conditions and wiring to the receiving charger controller. Include the actual sensor interface and connection requirements in the equipment brief.
Agree any required control setting with the receiving system and its actual sensor conditions. Keep the NTC designation attached to the complete wiring arrangement being confirmed.
Define termination and complete rating
Select the actual open, stripped, terminal or housing end required by the assembly. Retain its dimensions and wiring arrangement with the CEE7/7 source form.
Agree the full rating of the selected wire, plug and termination together. Match the requested 16A, 250V designation to that actual build and the receiving-equipment demand.
Set the input-lead route
The 0.9m reach corresponds to approximately 2.95ft. Measure around the actual source and receiving positions, accounting for the plug and selected end.
Keep the wire version, termination, NTC interface and full electrical demand with that route. These details define the input cable requested for the actual charger installation.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
