Series illustrations. Actual configuration is subject to the confirmed drawing.
Black EU CEE7/7 Schuko to Locking IEC C15 Spiral Coiled Power Cord, 1m Three-Core 0.75mm² H05VV-F Copper PVC 10A 250V Configuration Request
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C15Nominal size0.75 mm²
-
Rated voltage250 VInsulation materialPVC
-
Conductor materialCopper
-
Conductor MaterialCopperInsulation MaterialPVC
-
Rated Voltage250 VSize0.75mm2/3C
-
ApplicationTelecommunication, Home
-
IP LevelN/AJacketPVC
-
Rated Current10 A, 16 ATypeHigh Voltage
-
Working Temperature-25°C ~ 70°CFlame Retardant ClassClass A
-
NameC15 Iec Connector Cord 10a 250v 3 Pin European Plug CablecableH05VV-F 3C*0.75/1.0/1.5mm2
-
End TypeIEC C15colorblack
-
certificatedCE ,VDE,ROHSlength1m
-
conductorcopperjacketPVC
-
MOQ500 pcs
A spiral-coiled equipment lead should retain its actual locking interface with the cable version being ordered. This black EU CEE7/7 Schuko-to-locking-C15 configuration has a 1m three-core version, copper/PVC construction, featured H05VV-F 0.75mm² wire and a requested 10A, 250V designation.
Match the actual C15 lock and coil route
Compare the locking C15 form with the actual equipment inlet and its physical locking arrangement. Retain the CEE7/7 source form with that selected receiving interface.
Confirm the coiled route dimensions for the 1m version. Include the connector bodies and actual coil arrangement when defining the path needed by the installation.
Choose wire and complete electrical rating
Keep the featured three-core 0.75mm² H05VV-F copper/PVC construction or agree the actual 1.0 or 1.5mm² request. Retain the black finish with the chosen wire build.
Agree the complete 10A or 16A rating for the selected cable and both connection ends. Match the requested 10A, 250V designation to that actual assembly and connected equipment demand.
Set environment and required supporting scope
Match the -25°C to 70°C working-temperature designation to the actual installation environment. Keep that operating requirement with the selected coil geometry and route.
Confirm applicable Class A flame or CE/VDE/RoHS scope if required for the ordered version. The actual wire, lock and complete electrical build should remain in that same requirement.
A practical coiled-lead inquiry identifies the locking interface, coil dimensions, wire version, full rating and environment together. These details define the requested C15 assembly around one complete physical and electrical configuration for the receiving equipment.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
