Black IEC Three-Pin C20 to Dual C13 Y-Splitter AC Power Extension Cord for PDU Server Desktop Computer Monitor, PVC Selected 18 16AWG Wire Total-Rating Request

• AC Outlets Quantity

  2 Outlets
  Cable Length

  0.5 m, 1m, 1.2 m, 1.5 m, 1.8 m , 1.83 m, 2 meters
• End Type

  C20, C13
  Rated Current

  10 A
• Type

  Ac Power Cord, C20 to Dual C13 Y Splitter Power Cord
• Application

  Computer, Consumer Electronics, Home Appliance, Industrial Equipment, Instrumentation, Telecommunication, Computer, Home Appliance,
  Female End Type

  IEC, NAME, Stripped
• IP Level

  IP11
  Male End Type

  NEMA, BS, SEV,CEI
• Material

  Copper, PVC
  Wire Type

  SVT
• Plug

  C20
  End Connector

  IEC C5, C7,C13,C14, C15, Right Angle C14, Right Angle C13
• Plug Current

  10A
  Plug Rating

  110V
• Cable

  SVT,SJT, SJTW,18AWG 16AWG, h05vv-f 0.75mm
  Color

  Black, white, or others
• Length

  50cm 1m 1.5m or can be customized
  Jacket

  PVC
• Conductor

  Copper,CCA, CCS

The black IEC three-pin Y-splitter request connects C20 and dual-C13 forms for PDU, server, desktop-computer or monitor equipment. PVC construction should remain attached to the actual mating pair, both receiving branches and selected complete wire build.

Draw the actual two-receiver connection

Confirm the C20 source and two C13 receiving mates against the connected equipment. Keep both branch paths and all connector bodies in the complete physical assembly drawing.

Agree a requested C5, C7, C14, C15, right-angle C14 or right-angle C13 configuration where required. Retain that actual end arrangement with the source and receiving-equipment positions.

Define wire and conductor without changing units

Select SVT, SJT or SJTW with actual 18AWG or 16AWG requirements. Alternatively, agree the H05VV-F 0.75mm wire-size request and confirm its actual conductor-area units.

Choose copper, CCA or CCS conductor for the ordered PVC cable. Keep the chosen family, size and conductor arrangement with that particular two-output assembly.

Confirm whole-splitter electrical scope

Agree how the 10A and 110V plug designations apply to the complete selected lead. Match the whole electrical requirement to the wire, source, receiving ends and total connected-equipment demand.

Keep the actual Y-layout and branch wiring attached to that complete rating. The source and both receiving loads should refer to the same selected assembly.

Set complete and branch reach

Agree 0.5m, 1m, 1.2m, 1.5m, 1.8m, 1.83m or 2m, or custom reach, with actual overall and branch dimensions. Measure around the selected junction and all connection bodies.

Choose the actual black version or specify a white/other finish request for the selected Y assembly. Retain that appearance with the agreed branch dimensions, wire and whole rating for both receiving connections.