Series illustrations. Actual configuration is subject to the confirmed drawing.
Black US NEMA 1-15P to Angled Two-Slot Non-Polarized IEC320 C7 Figure-8 Power Cord, Featured 1.5ft SPT-2 18AWG PVC Selected-Wire Reach Request
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C7
-
AC Outlets Quantity1 OutletsCable Length1.83 m, 0.5 m, 1m, 1.2 m, 1.5 m, 1.8 m , 2 meters
-
End TypeC7Rated Current10 A
-
TypeAc Power Cord, US Plug to IEC C7 Power Cord
-
ApplicationComputer, Home Appliance,, Computer, Consumer Electronics, Home Appliance, Industrial Equipment, Instrumentation, TelecommunicationFemale End TypeIEC
-
IP LevelIP11Male End TypeNema
-
MaterialPVC, CopperWire TypeSPT-2 18AWG/16AWG
-
PlugNEMA 1-15PEnd ConnectorIEC C5, C7,C13,C14, C15, Right Angle C14, Right Angle C13
-
Plug Current10APlug Rating125V
-
CableSPT-2 NISPT-2 SVT,SJT, SJTW 18/16AWGColorBlack, white, or others
-
Length1m 1.5m or can be customizedJacketPVC
-
ConductorCopper,CCA, CCS
The black US figure-eight lead request pairs NEMA 1-15P with an angled two-slot non-polarized IEC320 C7 receiving form. PVC construction and a featured 1.5ft SPT-2 18AWG configuration should remain with the actual complete mating and wire arrangement.
Choose the actual angled receiving connection
Confirm C7 direction and mating dimensions against the equipment inlet. Retain the actual source form and receiving-body geometry in the complete physical drawing.
Agree any requested C5, C13, C14, C15, right-angle C14 or right-angle C13 end configuration. Keep that actual interface requirement attached to the selected equipment position.
Select wire and conductor together
Choose SPT-2, NISPT-2, SVT, SJT or SJTW with actual 18AWG or 16AWG. Agree copper, CCA or CCS conductor for the ordered PVC cable.
Retain the featured SPT-2 18AWG request or the actual selected alternative with that mating pair. Keep conductor and wiring arrangement attached to the same complete physical build.
Set the exact ordered reach
Agree actual 1.5ft or a requested 0.5m, 1m, 1.2m, 1.5m, 1.8m, 1.83m or 2m dimension, or custom reach. Include the selected source and angled receiving bodies when measuring the equipment path.
Retain actual black or agree requested white or another finish for that ordered lead. Keep the exact route with its chosen cable family and actual interface dimensions.
Confirm the whole electrical requirement
Agree complete 10A/125V scope for the selected source, wire and receiving end. Match the full assembly specification to the actual connected-equipment demand.
Confirm applicable protection requirements if needed by the receiving installation. Retain actual angle, wire, exact reach, complete rating and load together as one selected figure-eight equipment lead.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
