Series illustrations. Actual configuration is subject to the confirmed drawing.
Desktop Two-RJ45 PoE Injector for IP Cameras | 48V 0.5A Gigabit 24W Build Request
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
ApplicationIP Cameras
-
TypeDesktopFeaturesPOE injector power adapter
-
Mounting TypepoeDescription48v 0.5a
-
Operating Temperature-25-70℃Power24W
-
Efficiency85%Voltage - Supply48V
-
Number of Ports2Current0.5A, 0.5A
-
Auxiliary SenseYesProduct Name48V 0.5A Poe Injector
-
Input100-240V AC 50/60HzOutput24V 0.5A
-
ProtectionOVP OCP OTPMaterialPlastic
-
PlugDesktop With Power CablesOutput type2*RJ45 connector
-
CertificationCE,RoHSWarranty3 months
This plastic desktop PoE-injector request brings two RJ45 jacks into an IP-camera power connection. Featured 48 V/0.5 A, 24 W and gigabit-link requirements accompany a 100–240 V AC 50/60 Hz input and a desktop power-cable arrangement.
Resolve output before selecting the camera load
Agree whether the actual supplied output is the 48 V or 24 V configuration and establish its current and complete power rating. Match the selected output with camera demand rather than treating the 24 W designation as an automatic rating for every voltage arrangement.
Retain the actual supply and receiving-device requirements in the same electrical brief. They define the output choice that the particular camera installation needs.
Assign the two network connections
Confirm the data-input and PoE-output roles of the two RJ45 connectors. Agree actual pin assignment, PoE mode and supported link rate with the source and camera, including the featured gigabit requirement where the selected device supports it.
Keep sensing and protection functions specific
Auxiliary sensing and OVP/OCP/OTP functions are part of the requested arrangement. Agree how those functions apply to the selected injector together with the required desktop power cables and the actual operating installation.
Bring the output mapping, port roles, camera demand and supply arrangement into the final specification. Where particular efficiency or temperature performance is needed, obtain applicable support for the selected injector and operating conditions.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
