Series illustrations. Actual configuration is subject to the confirmed drawing.
Grounded Molded-Strain-Relief NEMA 5-15P to IEC C13 PC Power Cord, 4ft 18AWG SJT Bare Copper PVC 10A 125V PSU Monitor Lead
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C13Conductor materialBare copper
-
AC Outlets Quantity1 OutletsCable Length1.22 m(4ft)
-
End TypeC13Rated Current10 A
-
TypeExtension Cord
-
ApplicationHome ApplianceFemale End TypeIEC
-
IP LevelIP11Male End TypeNema
-
MaterialPVCWire TypeSJT
-
typeUS Power Extension CordconnectorNEMA 5-15P Plug
-
cable16awg ,18awg,14awgConductorBare copper
-
Rating125V,10AEndIEC C13 Connector
-
ApplicatonHome appliance, Laptop, PC, ComputerLengthCan be customized
-
colorWhite, black, grey,etcCertificateYes
A grounded equipment cord with molded strain relief should be defined with the actual receiving assembly. This NEMA 5-15P-to-C13 lead has featured 18AWG SJT bare-copper/PVC construction, a 1.22m/4ft reach and a 10A, 125V designation.
Define the strain-relief arrangement
Specify the actual relief geometry and connection dimensions required by the PC power unit or monitor. Keep those mechanical details with the molded strain-relief configuration and selected cable.
Include the space available around the receiving position. The mechanical arrangement should follow the installation where the lead will be connected.
Match the grounded mating pair
Check the NEMA 5-15P supply form and C13 receiving end against the actual equipment. Retain the grounded conductor arrangement in the complete assembly specification.
Keep the receiving-device demand with both mates. The grounded build, connector geometry and wire requirement should describe one ordered version.
Select wire construction and rating
The featured cable is 18AWG SJT with bare copper and PVC material. Match the 10A, 125V requirement to the actual source and equipment load.
Alternative 16AWG or 14AWG construction can be agreed. Identify the selected gauge explicitly with the full cable and connector build.
Set the relief and cable route together
Use the featured 4ft (1.22m) reach or agree a custom dimension for the actual path. Include both connectors and the required relief space when defining that route.
White, black or grey finish requests should remain with the selected wire and length. These details define the particular grounded PC-equipment lead needed by the receiving assembly.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
