The construction drawing is the starting point for this four-core NG-A power-cable request. Copper conductors and mineral insulation are combined with flexible, fire-resistant construction and a 0.6/1kV voltage rating.
The featured option pairs a 50 mm² size reference with four cores. Keep that configuration with the project requirements as the cable schedule is completed.
Turn the four-core layout into a circuit schedule
Identify the intended duty of each conductor and the required section for that duty. Use the selected 50 mm² reference as part of the specification, then confirm the individual sections and connection arrangement on the final cable drawing.
- NG-A identifies the cable family required by the project.
- Four copper cores define the featured conductor arrangement.
- Mineral insulation retains the stated insulation material.
- Flexible construction remains a known cable feature.
- The 0.6/1kV designation provides the stated rated voltage.
Set out the construction-site cable requirement
Provide the physical length needed for the planned route and the cable-end requirements at both connections. Specify the sheath construction for the selected NG-A version, allowing the material build and termination arrangement to be assessed together for the intended installation.
Give the fire-safety review a defined scope
If the construction project requires an exact fire-test criterion, identify that requirement for the ordered cable and its installation conditions. Keep the fire-resistant NG-A build and the project's acceptance requirement together in the cable schedule. A complete four-core schedule, route length and end arrangement give this NG-A cable a practical basis for project quotation.
