Series illustrations. Actual configuration is subject to the confirmed drawing.
OFC AWM3135 20AWG or 0.5mm² 100-Strand 600V Silicone Motor Power Wire for 3D Printer and Robot Joints
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Nominal sizeMultiple AWG optionsRated voltage600 V
-
Insulation materialSilicone
-
Conductor MaterialTinned Copper, Pure Copper or as requestDiameter12 AWG, 20 AWG, 22 AWG, 24 AWG, 8 AWG, 14 AWG, 16 AWG, 18 AWG, 6 AWG, 2 AWG, 4 AWG, 1.5mm, 15awg
-
Insulation MaterialSiliconeRated Voltage600V
-
ApplicationAuto, Electronics, Medical Equipment, Electric Appliance, Motor Winding, Transformer, Railway, Heating, Industrial, Electrical equipment, equipment wiring, Ectronic internal wiring
-
Conductor TypeStrandedShapeRound
-
Single Wire Size0.1 mm, 0.3mm, 0.2 mm, 0.4mm, 0.5mm, 0.6 mm, 0.8mm, 0.7mm, 0.9 mm, 1.0mm, 1.1 mm, 1.2 mm, 1.3 mm, 1.5 mm, 1.4 mm, 1.6 mm, 1.7 mm, 1.8mm, 2.0 mm, 1.9 mm, 2.2 mm, 2.1 mm, 2.3 mm, 2.4 mm, 2.5 mm, 2.6mm, 2.7 mm, 2.8 mm, 2.9 mm, 3.0mm, CustomWorking Temperature0 °C ~ 50 °C, 105 °C, 0 °C ~ 70 °C, 0 °C ~ 90 °C, -20 °C ~ 0 °C, 250°C, -30 °C ~ 105 °C, 50 °C ~ 100 °C, -55℃~150℃, -60℃-200℃, or other
-
TypeInsulatedProduct nameSingle core Silicone electric wire
-
PAYMENT TERMS45% deposit in advance,55% balance against B/LDelivery time3day for sample; 7day for bulk order
-
UsageLithium Battery,Inverter,Aviation model,Robot Arm,UAV;ServiceOffer datesheets, sample, testing report,quality system audit report
-
Rolling TypeExport wooden drum/ plastic drum/ wooden box/ iron drum or customSampleExcellent Free Sample Experience
-
OEM ODM AcceptInsulation material/ Conductor Type & construction/Connector/ PackingSize1-30 AWG ( or as your request )
-
FeatureTemperature Resistant ,Oil Resistant,VW-1 FT-1 Flame Resistance
OFC AWM3135 silicone motor-power wire is presented in requested 20AWG or 0.5mm² constructions with 100 strands. The described 600V component is round and single-core for 3D-printer and robot-joint connection enquiries. Tinned copper, pure copper or requested conductor alternatives can also be specified.
Keep the 100-strand construction with its actual dimensions
Identify the required gauge or area basis and give the actual conductor and individual strand dimensions. Individual wire-size choices extend across 0.1–3.0mm or custom construction. Include finished silicone diameter, lead lengths and terminal fit so the proposed 100-strand motor lead has a clear equipment-component drawing.
Describe how the printer or robot-joint lead will operate
Provide motor-circuit load, complete working-temperature range, continuous duty and route. Include any actual motion requirements for the selected connection. Temperature, oil and flame resistance are described for this motor-wire enquiry; the equipment's electrical or material requirements should accompany the chosen conductor and insulation.
Which documents should accompany the chosen motor-wire sample?
The offered free sample can represent the required 20AWG or 0.5mm² construction for review. Ask for its datasheet and the test or quality-system audit reports relevant to the printer or robot project. Identify applicable VW-1 or FT-1 report scope when that evidence is needed for the same finished motor lead.
Set the motor-lead quantities and finishing arrangement
Provide total quantity and finished lengths using the reviewed construction drawing; a 1m offering accompanies the silicone choices. Discuss custom insulation, conductor type and construction, connectors and drum, box or custom packing for the particular motor connection. Keep supply detail aligned with the actual printer or robot duty and the dimensions assessed with the sample.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
