Series illustrations. Actual configuration is subject to the confirmed drawing.
US NEMA 5-15P to IEC C5 Cloverleaf Power Cord, 18AWG Copper PVC Black or White Custom-Reach Equipment Lead
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C5
-
AC Outlets Quantity1 OutletsCable Length1.83 m, Customized
-
End TypeC5Rated Current10 A, 13 A, 15 A
-
TypeAc Power Cord, Us Plug to IEC C5 Ac Power Cord Cable
-
ApplicationComputer, Consumer Electronics, Home Appliance, Industrial Equipment, Instrumentation, TelecommunicationFemale End TypeIEC
-
IP LevelIP11Male End TypeNema
-
MaterialPVC, CopperWire TypeSVT, SJT, SJTO, SJTOW, SJTW
-
Plug Rating125VPlug Current10A
-
ConnectorNEMA 5-15P to IEC C5Connector voltage10A 250V
-
Connector Current7A 125VCableSVT/SJT 16AWG,18AWG/3Cores
-
Length1FT-15FT or others can be customizedColorBlack, white, or others are available
-
Warranty12 Months
A cloverleaf equipment lead needs the correct inlet connection as well as a suitable supply plug. This US NEMA 5-15P-to-IEC C5 cord uses copper/PVC construction and offers black or white choices, with a featured 18AWG wire requirement.
Match the C5 power-unit inlet
Check the C5 end against the actual receiving equipment inlet. A computer or laptop power-unit category alone does not establish the connector required by every unit.
Compare the NEMA 5-15P plug with the intended US supply point at the same time. Identifying both mating forms gives the lead a clear connection requirement before cable construction is finalized.
Define the wire build and exact reach
Specify the featured 18AWG construction or agree a three-core 16AWG SVT/SJT alternative. Keep the conductor arrangement and cable family with the equipment requirement for the actual ordered version.
Length requests range from 1ft to 15ft, with custom reach available. Measure along the intended route and confirm the exact cable length, including the connector positions at both ends.
Check component and complete-cord ratings
The supply plug has a 10A, 125V designation. Confirm the complete cord rating and the C5 connector rating for the selected build before matching the device load.
The cable, supply plug and equipment connector should be considered as one assembly. A value assigned to one component should not replace the complete electrical requirement of the ordered lead.
A useful inquiry combines actual inlet, US supply, chosen color, wire build and required reach. These details give the cloverleaf cable a defined specification for the particular equipment being supplied.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
