Series illustrations. Actual configuration is subject to the confirmed drawing.
14AWG 2ft IEC C20 to Dual C13 Y-Splitter Power Cord, Black PVC Equipment Lead with Custom Configuration Requests
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C20 , IEC C13
-
AC Outlets Quantity2 OutletsCable Length0.5 m, 1m, 1.2 m, 1.5 m, 1.8 m , 1.83 m, 2 m
-
End TypeC20, C13Rated Current10 A
-
TypeAc Power Cord, IEC C20 to Dual C13 Y Splitter Power Cord
-
ApplicationComputer, Consumer Electronics, Home Appliance, Industrial Equipment, Instrumentation, Telecommunication, Computer, Home Appliance,Female End TypeIEC, NAME, Stripped
-
IP LevelIP11Male End TypeNEMA, BS, SEV,CEI
-
MaterialCopper, PVCWire TypeH05VV-F 0.75MM
-
PlugIEC C20End ConnectorIEC C5, C7,C13,C14, C15, Right Angle C14, Right Angle C13
-
Plug Current10APlug Rating110V
-
CableSVT,SJT, SJTW,16AWG 18AWGColorBlack, white, or others
-
Length50cm 1m 1.5m or can be customizedJacketPVC
-
ConductorCopper,CCA, CCS
A two-device splitter should be defined by its actual connector pattern and combined equipment demand. This black IEC C20-to-dual-C13 Y-type power cord uses PVC construction, with a featured 2ft, 14AWG requirement to specify for the ordered build.
The two C13 ends share one C20 supply connection. Check all three mating points before choosing the cable route or final wire construction.
Confirm the one-to-two equipment layout
Compare the C20 end with the actual supply point. Check each C13 end against the receiving equipment inlet so both branches match the intended devices.
Keep the connected loads together when defining the assembly requirement. Two receiving ends do not create two independent incoming capacities.
Choose reach and actual wire construction
Specify the featured 2ft, 14AWG build or agree an alternative reach and cable configuration. Confirm the conductor composition and exact cable family for the ordered version.
Length requests include 0.5m, 1m, 1.2m, 1.5m, 1.8m, 1.83m and 2m, with custom reach available. Measure the route from the supply point to both equipment inlets, including connector positions.
Match the complete splitter rating
The supply end has a 10A, 110V designation. Confirm the full splitter current and voltage rating for the selected wire build against the combined equipment demand.
The cable, C20 supply end and both C13 connections should be considered together. Include the actual construction with the receiving-device requirements rather than selecting the splitter from connector names alone.
A useful inquiry brings mating points, reach, conductor build and total load into one specification. These details define the Y-splitter needed for the actual equipment arrangement.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
