Series illustrations. Actual configuration is subject to the confirmed drawing.
IEC C20 to Dual C19 Splitter Power Cord, 30cm 14AWG 3C SJT Copper PVC Equipment Extension
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C20 , IEC C19Conductor materialCopper
-
AC Outlets Quantity2 OutletsCable Length0.3 m(0.98ft)
-
End TypeC19, C20, IEC C20/C19Rated Current16 A, 15 A, 13 A, 10 A
-
TypeAc Power Cord
-
ApplicationHome appliance, computer, laptop, Home Appliance ,Computer ,laptopFemale End TypeIEC
-
IP LevelIP11Male End TypeIEC
-
MaterialCopper, PVCWire TypeSJT
-
Product nameAc Cable C20 To Splitter dual C19 Power CordCableh05vv-f 3G*1.5mm2,SJT SVT SJTW 14AWG/3C, or as your request
-
Plug Rating100-240vPlug Current16A
-
CertificateCE,US,BSI,VDE,ROHSLength0.3M,1m, 1.5m, 1.8m, 2m or customized
-
ConductorcopperJacketPVC
One C20 supply end branches into two C19 equipment connections on this compact splitter lead. The 30cm copper and PVC configuration uses a 14AWG three-conductor SJT-family cable build for an installation with matching IEC connections.
Plan the three mating points together
Check the supply-side connection for the C20 end and the inlet on each receiving device for the C19 ends. A two-branch cord needs all three mating points to suit the intended arrangement before cable reach becomes the next selection step.
The two equipment ends share the same incoming connection. Identify the connected devices and their combined demand rather than assessing each branch as though it had a separate supply capacity.
Check reach around the equipment
The featured 30cm lead is intended for a short connection route. Measure the available path from the supply point to both equipment inlets, including the direction and space occupied by the connectors.
Other length requests can specify 1m, 1.5m, 1.8m or 2m, alongside custom reach discussion. Keep the selected length with the required branch arrangement so the requested build fits the actual positions of the two devices.
Set the complete splitter requirement
The plug carries a 16A, 100–240V designation. Confirm the current and voltage rating of the complete splitter for the chosen cable construction and the combined connected load.
Specify the 14AWG three-core SJT-family configuration when that is the required build, or agree an alternative conductor arrangement explicitly. Connector ratings and a cable-family name should be checked together for the ordered assembly.
A useful inquiry includes the C20 supply connection, both C19 equipment connections, required reach and total equipment demand. This gives the compact splitter a clearly defined role in the installation.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
