Series illustrations. Actual configuration is subject to the confirmed drawing.
Soft Red and Black 12AWG/3.5mm² 600V 200°C Silicone Inverter Wire with 0.08mm Individual Wires
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Nominal sizeMultiple AWG optionsRated voltage600 V
-
Insulation materialSilicone
-
Conductor MaterialTinned Copper(custom Pure Copper or as request )Diameter30AWG, 28AWG, 26AWG, 24AWG / 0.2 mm², 22AWG / 0.3 mm², 20AWG / 0.5 mm², 18AWG / 0.75 mm², 17AWG / 1.0 mm², 16AWG/1.27 mm², 15AWG / 1.5 mm², 14AWG / 2.0 mm², 13AWG / 2.5 mm², 12AWG / 3.5 mm², 11AWG / 4 mm², 10AWG / 5.3 mm², 9AWG / 6.53 mm², 8AWG / 8.3 mm², 7AWG / 12 mm²., 6AWG / 16 mm², 5AWG / 20.1 mm², 4AWG / 25 mm², 3AWG/33.7 mm², 2AWG / 50 mm², 70 mm², 1AWG / 75 mm², 95.5 mm², 120 mm², 150 mm²
-
Insulation MaterialSiliconeRated Voltage600V
-
ApplicationAuto, Electronics, Medical Equipment, Electric Appliance, Motor Winding, Transformer, Railway, Heating, Industrial, Electrical equipment, equipment wiring, Ectronic internal wiring
-
Conductor TypeStrandedShapeRound
-
Single Wire Size0.1 mm, 0.3mm, 0.2 mm, 0.4mm, 0.5mm, 0.6 mm, 0.8mm, 0.7mm, 0.9 mm, 1.0mm, 1.1 mm, 1.2 mm, 1.3 mm, 1.5 mm, 1.4 mm, 1.6 mm, 1.7 mm, 1.8mm, 2.0 mm, 1.9 mm, 2.2 mm, 2.1 mm, 2.3 mm, 2.4 mm, 2.5 mm, 2.6mm, 2.7 mm, 2.8 mm, 2.9 mm, 3.0mm, Custom, 0.08mm for this wireWorking Temperature0 °C ~ 50 °C, 105 °C, 0 °C ~ 70 °C, 0 °C ~ 90 °C, -20 °C ~ 0 °C, 250°C, -30 °C ~ 105 °C, 50 °C ~ 100 °C, -55℃~150℃, -60℃-200℃, or other, -60℃-200℃ for this wire
-
TypeInsulatedProduct nameSingle core Silicone electric wire
-
PAYMENT TERMS45% deposit in advance,55% balance against B/LDelivery time3day for sample; 7day for bulk order
-
UsageLithium Battery,Inverter,Aviation model,Robot Arm,UAV;ServiceOffer datesheets, sample, testing report,quality system audit report
-
Rolling TypeExport wooden drum/ plastic drum/ wooden box/ iron drum or customSampleExcellent Free Sample Experience
-
OEM ODM AcceptInsulation material/ Conductor Type & construction/Connector/ PackingSize1-30 AWG ( or as your request )
-
FeatureTemperature Resistant ,Oil Resistant,VW-1 FT-1 Flame Resistance
Soft red and black 12AWG/3.5mm² silicone wire is presented for inverter connections at 600V. Its specified −60°C to 200°C working range accompanies a round, stranded single-core construction using 0.08mm individual wires. For this 12AWG inverter component, conductor enquiries can specify tinned copper, custom pure copper or requested materials.
Choose the individual coloured inverter lead needed by the assembly. Its finished dimensions, length and actual operating duty provide the basis for reviewing a sample and obtaining the corresponding supply details.
Specify the individual soft red or black 12AWG lead
Give actual copper dimensions and strand count with the required colour and length. Add finished silicone diameter and terminal fit to the inverter-component drawing. A 1m offering includes the 12AWG/3.5mm² silicone choice, so the enquiry can identify this particular size and its required finishing arrangement.
Define the inverter operating conditions for that component
State circuit load, continuous duty and surroundings along the intended route. Temperature, oil and flame resistance are part of the soft inverter-wire specification. Keep the equipment's electrical or material requirements with the selected conductor and insulation when assessing the lead against the actual duty and stated thermal range.
Which evidence and supply quantities belong to each coloured lead?
Request the offered free sample and its datasheet for the proposed 12AWG construction. Ask for the relevant test or quality-system audit documents, with applicable VW-1 or FT-1 report scope where the inverter project requires it. The evidence should concern the same finished wire being reviewed.
Provide total quantities and finished lengths with each colour's component drawing. Discuss custom insulation, conductor construction, connectors and drum, box or requested packing for supply aligned with the actual inverter connection dimensions and operating duty.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
