Series illustrations. Actual configuration is subject to the confirmed drawing.
TPS/6242Y Flat Copper PVC Twin-and-Earth Building Cable, 3-Core, 1.5/2.5/4mm Requests
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Core count3 coresRated voltage450/750 V
-
Insulation materialPVCConductor materialCopper
-
Conductor Material99.99% copperDiameterCustom
-
Insulation MaterialPVCRated Voltage450/750V(TPS)
-
Applicationindoor or outdoor surface wiring, power lighting ,housing wiring
-
Conductor TypeStranded/SolidShapeFlat , Custom
-
Single Wire SizeCustomWorking TemperatureNIL
-
TypeInsulatedProduct nameTPS Flat Cable
-
ConductorPure Copper CoreUsageindoor or outdoor surface wiring, power lighting ,house wiring
-
Insulation/JacketPVCKeywordHousing wiring / Building Cable
-
StandardAS/NZS 5000.2:2006Cores3core
-
Normal Operating Temperature75°CInner Two Core ColoursRed, Black & Green/Yellow
-
CertificationSAA /ISO9001
A twin-and-earth building-cable specification needs the insulated conductors and earth arrangement defined together. Three-core construction is described for this flat copper PVC cable, with the selected TPS or 6242Y designation to match the actual project requirements.
Draw the required conductor and earth schedule
For the 1.5mm, 2.5mm or 4mm requests, provide dimensioned conductor cross-sections and explain the size basis on the drawing. Set the actual insulated-core and earth schedule for the chosen code, including any red, black or green/yellow core requirements and finished flat-cable dimensions.
- The conductor material is specified as 99.99% copper.
- Solid or stranded construction is described.
- PVC is specified for insulation and jacket.
- Individual-wire dimensions can be customized.
- A 1 m catalogue offering is available.
Keep operating parameters with the selected TPS build
The TPS construction is described at 450/750 V with a 75°C normal operating temperature. Give actual housing or lighting circuit load, route and exposure with that specification. Define any project-specific installation conditions for the exact construction being requested.
Match the project standard to the exact cable
Identify the required AS/NZS 5000.2:2006 scope and any applicable SAA or ISO9001 evidence. Keep the TPS or 6242Y designation and its own selected specification together when reviewing the conductor arrangement and finished cable.
Complete the building-cable supply brief
State the selected full code, actual conductor and earth dimensions, completed lengths and quantity in the enquiry. Settle the required supplied scope against the same drawing used for the building circuit and its installation requirements.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
