Series illustrations. Actual configuration is subject to the confirmed drawing.
UK 3-Pin Fused Plug to IEC C7 Figure-8 Power Cord, H03VVH2-F PVC Black Custom-Length Equipment Lead
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C7
-
AC Outlets Quantity1 OutletsCable Length1.83 m, Customized
-
End TypeC7Rated Current10 A, 13 A
-
TypeAc Power Cord
-
ApplicationHome Appliance, Computer, Consumer Electronics, Industrial Equipment, Instrumentation, TelecommunicationFemale End TypeIEC
-
IP LevelIP11Male End TypeBS
-
MaterialCopper, PVCWire TypeH03VVH2-F 0.75MM
-
ItemUK Plug to IEC C7 Extension Power Cord Cablepluguk plug
-
The other end of connectorc7length1m 1.5m 1.8m 2m or customized
-
CableH03vvh2-f 2*0.5mm2/2*0.75mm2/2*1.0mm2Conductorcopper,CCU,CCA
-
JacketPVCcolorwhite/black,etc
-
fuse3a 5a 13aOEM/ODMYes
A fused figure-eight equipment lead should be selected around the device inlet and actual cable construction. This black UK three-pin-to-IEC C7 power cord uses H03VVH2-F cable and PVC material, with a featured 1.83m reach.
The UK plug configuration has 13A and 250V designations. The fuse and complete cord rating should be agreed with the receiving equipment requirement.
Set the fuse and conductor build
Fuse requests include 3A, 5A and 13A. Specify the value required for the actual assembly rather than treating every fuse reference as the selected version.
Two-core H03VVH2-F requests include 0.5mm², 0.75mm² and 1.0mm² conductor sizes. Confirm the conductor composition and complete electrical rating with the chosen fuse and wire build.
Match the UK and C7 connections
Check the UK supply-plug form at the intended outlet. Compare the C7 figure-eight end separately against the actual receiving equipment inlet.
A device category alone does not establish the power connection needed by every unit. Keep the actual inlet detail with the supply and electrical requirements in the order specification.
Choose reach for the equipment route
The featured length is 1.83m, with 1m, 1.5m, 1.8m, 2m or custom reach requests also available. Measure along the intended cable path and include the connector positions when defining the required length.
OEM and ODM requests are available for the specified build. Include the UK plug, C7 inlet, fuse, conductor requirement and equipment demand with the selected reach.
These details give the fused lead a clear physical and electrical role. The final specification should follow the particular equipment that the cord will supply.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
