US NEMA 5-15P to C13 3-Prong AC Power Cord, 5ft 1.5m 10A 125V for Computer TV Printer Monitor Radio

• AC Outlets Quantity

  1 Outlets
  Cable Length

  0.5 m, 1m, 1.2 m, 1.5 m, 1.8 m , 1.83 m, 2 m
• End Type

  C13
  Rated Current

  10 A, 13 A, 15 A
• Type

  Ac Power Cord, Us 3 Pin Plug to C13 Power Cord
• Application

  Computer, Consumer Electronics, Home Appliance, Industrial Equipment, Instrumentation, Telecommunication, Computer, Home Appliance,
  Female End Type

  IEC, NAME, Stripped
• IP Level

  IP11
  Male End Type

  NEMA, BS, SEV,CEI
• Material

  PVC
  Wire Type

  SVT, SJT, SJTO, SJTOW, SJTW
• Plug

  NEMA 5-15P
  Plug Rating

  125V
• Plug Current

  10A 13A 15A
  End Connector

  IEC C5, C7,C13,C14, C15, Right Angle C14, Right Angle C13
• Cable

  SVT,SJT, SJTW 18AWG/16AWG
  Length

  1m 1.5m 1.8m or can be customized
• Color

  Black, white, or others
  Jacket

  PVC
• Conductor

  Copper,CCA, CCS

A replacement power lead should match the equipment inlet as well as the supply outlet. This US three-prong AC cord pairs a NEMA 5-15P plug with a C13 equipment end, with a featured 5ft, approximately 1.5m, 10A 125V configuration and PVC jacket.

Check the inlet on each device

Computers, printers, monitors, televisions and radios can use different power connections. Select this lead for a device with the matching C13 mating inlet, and check the US supply connection before treating it as a replacement.

The connector pair matters more than the equipment category. When several devices sit together, inspect the inlet on the particular unit being connected instead of assuming that adjacent electronics need the same cable.

Choose color and usable reach

Black and white configurations are available for the US plug arrangement. Select the color required for the installation while keeping the connector and electrical requirements consistent.

For the featured build, plan around a 5ft, approximately 1.5m reach. Other length requests include 0.5m, 1m, 1.2m, 1.8m, 1.83m and 2m, with custom length discussion available when those choices do not fit the route.

Confirm the ordered cable construction

Use the featured 10A, 125V requirement when matching this configuration to the equipment. Confirm the complete cord rating, conductor material and wire gauge for the ordered build before choosing an alternative construction or a higher load.

The PVC jacket describes the outer cable material; it does not settle every internal construction choice. Include the intended equipment demand and required reach in the order so those details can be checked together.

A clear replacement request identifies the device inlet, US plug, length and color in one place. It helps keep an ordinary equipment-cord purchase focused on the connection the device actually needs.