Series illustrations. Actual configuration is subject to the confirmed drawing.
1/0AWG/53mm² Silicone-Insulated Stranded Copper Wire for Low-Voltage EV Charging Connections
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
Nominal sizeMultiple AWG optionsRated voltage600 V
-
Insulation materialSilicone
-
Conductor MaterialTinned Copper, Pure Copper or as requestDiameter12 AWG, 20 AWG, 22 AWG, 24 AWG, 8 AWG, 14 AWG, 16 AWG, 18 AWG, 6 AWG, 2 AWG, 4 AWG, 53mm²
-
Insulation MaterialSiliconeRated Voltage600V
-
ApplicationAuto, Electronics, Medical Equipment, Electric Appliance, Motor Winding, Transformer, Railway, Heating, Industrial, Electrical equipment, equipment wiring, Ectronic internal wiring
-
Conductor TypeStrandedShapeRound
-
Single Wire Size0.1 mm, 0.3mm, 0.2 mm, 0.4mm, 0.5mm, 0.6 mm, 0.8mm, 0.7mm, 0.9 mm, 1.0mm, 1.1 mm, 1.2 mm, 1.3 mm, 1.5 mm, 1.4 mm, 1.6 mm, 1.7 mm, 1.8mm, 2.0 mm, 1.9 mm, 2.2 mm, 2.1 mm, 2.3 mm, 2.4 mm, 2.5 mm, 2.6mm, 2.7 mm, 2.8 mm, 2.9 mm, 3.0mm, CustomWorking Temperature0 °C ~ 50 °C, 105 °C, 0 °C ~ 70 °C, 0 °C ~ 90 °C, -20 °C ~ 0 °C, 250°C, -30 °C ~ 105 °C, 50 °C ~ 100 °C, -55℃~150℃, -60℃-200℃, or other
-
TypeInsulatedProduct nameSingle core Silicone electric wire
-
PAYMENT TERMS45% deposit in advance,55% balance against B/LDelivery time3day for sample; 7day for bulk order
-
UsageLithium Battery,Inverter,Aviation model,Robot Arm,UAV;ServiceOffer datesheets, sample, testing report,quality system audit report
-
Rolling TypeExport wooden drum/ plastic drum/ wooden box/ iron drum or customSampleExcellent Free Sample Experience
-
OEM ODM AcceptInsulation material/ Conductor Type & construction/Connector/ PackingSize1-30 AWG ( or as your request )
-
FeatureTemperature Resistant ,Oil Resistant,VW-1 FT-1 Flame Resistance
A wire used within EV-charging equipment needs its own component definition. This silicone-insulated stranded-copper wire is requested in 1/0AWG, also described as 0 gauge, or 53mm² for low-voltage charging connections.
Identify the part of the charging circuit
Describe the actual voltage, load and connection points for the proposed wire. Keep the stated 600 V component designation separate from the operating requirements of the charging circuit and provide the project-specific electrical or material conditions.
Specify the conductor and silicone dimensions
The described wire is round and single-core, with tinned copper, pure copper or a requested conductor material. Confirm the gauge or area basis with strand count, conductor dimensions and finished insulation size on the selected lead drawing.
- 1/0AWG and 53mm² remain the supplied size references.
- Stranded copper defines the electrical conductor request.
- Silicone is the stated insulating material.
- The component has a round single-core form.
- A 1 m length option is available for the enquiry.
Set the duty and construction review
State continuous duty, routing conditions and the complete working-temperature range. Individual-wire dimension references span 0.1 to 3.0 mm or custom; identify their meaning for the final construction. Temperature, oil and flame resistance are described, with applicable VW-1/FT-1 evidence to request if needed. Ask for the offered free sample and its datasheet, test and quality-system audit reports. Include final lengths, quantity and any custom insulation, conductor, connector or drum/box packing so the supply enquiry follows the specific charging-equipment connection.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
