Series illustrations. Actual configuration is subject to the confirmed drawing.
US NEMA 5-15P to IEC C13 Power Cord, 1.5m 18AWG or 16AWG PVC Lead 125V for PDU Server UPS
-
Quotation & delivery: Include your required quantity, destination and timing in the enquiry. Confirm the selected build, lead time, shipping charges and any return terms in the agreed quotation before ordering.
-
End connectionIEC C13
-
AC Outlets Quantity1 OutletsCable Length1.5 m(4.92ft)
-
End TypeC13Rated Current15 A, 10 A
-
TypeAc Power Cord
-
ApplicationHome ApplianceFemale End TypeIEC
-
IP LevelIP20Male End TypeNema
-
MaterialPVCWire TypeSJT
A PDU, server or UPS power connection should be defined by the actual mating points and selected wire build. This US NEMA 5-15P to IEC C13 cord has a 1.5m reach, PVC material and 18AWG or 16AWG choices for the required equipment route.
Choose the required gauge
Select 18AWG or 16AWG according to the complete assembly specification needed for the installation. Keep that choice with the required cable family and conductor build rather than treating wire gauge as the only selection detail.
Agree the actual SJT or SJTW requirement for the ordered version. The cable construction and complete current rating need to be defined together before the cord is matched to the connected load.
Check both equipment connections
The NEMA 5-15P plug defines the US supply side, and the C13 end defines the receiving equipment connection. Inspect both mating forms before choosing the lead for a PDU, server, UPS or home appliance.
A general equipment category does not establish the inlet on a particular unit. Include the actual receiving connection with the supply requirement when requesting the cord.
Match reach and electrical demand
The defined cable reach is 1.5m, approximately 4.92ft. Measure along the intended route and include the positions of both connectors when deciding whether that length fits.
The configuration has a 125V designation. Confirm the current rating of the complete selected gauge and cable build, then compare it with the equipment requirement and intended supply arrangement.
A useful order identifies both connector ends, 1.5m reach, chosen gauge and cable family in one place. These details give the equipment lead a clear physical and electrical specification.
Provide the product reference, selected configuration, quantity and destination. Confirm drawings, applicable ratings and acceptance requirements for the requested build. Lead time, shipping arrangements, charges and any return conditions should be reviewed in the agreed quotation before ordering.
